12
6.2 SHOOT / RECORD BUTTON
The SHOOT / RECORD Button is located on right side on top of the
ZXM-AC2. This Button is interchangable and is used to both shoot still
images and record videos.
The SHOOT / RECORD Button is also used to access the Settings
menus, select menu items and confirm your selection.
6.3 ACCESSING SYSTEM SETTINGS
You can access system Settings when using any of the camera Modes.
To access system Settings for the ZXM-AC2 follow the below steps:
1. Press the SHOOT / RECORD Button to end recording (if required).
2. Press the POWER ON / OFF Button four times, this will open up the
Settings menu.
3. Quick press the SHOOT / RECORD Button once to activate the
Settings.
NOTE: To move through the Settings tabs, press the POWER ON /
OFF Button. To move through the Settings tab options, use
the UP / DOWN arrow Buttons. To select a Setting, adjust or
confirm and use the SHOOT / RECORD Button.
To Next Page
Loading...
