29
8.6 MICROPHONE
The ZXM-AC2 has the ability to turn the Microphone ON or OFF when
you are recording. The ZXM-AC2 default setting is ON. To change this
and use the Microphone while recording, follow the below steps:
1. Press the SHOOT / RECORD Button to end recording if you are in
video mode and recording.
2. Press the POWER ON / OFF Button four times, this will open up the
Settings menu. Press the SHOOT / RECORD Button to activate the
Settings page. ZXM-AC2 video Settings is the first menu that comes up.
3. Press the DOWN Button once to navigate down to ‘
Microphone’
.
You will see this option highlight.
If this function is activated there
will be a tick in the box.
4. Press the SHOOT / RECORD Button to either activate or deactivate it.
5.
To exit the Settings Menu, press the POWER ON / OFF Button four
times, you will be prompted to press the SHOOT / RECORD Button
to confirm exiting.
8.7 PLAYBACK MODE
To view your photos and images taken with the ZXM-AC2, you will
need to activate the Playback Mode function.
To Next Page
Loading...
