20
4. Press the DOWN Button 6 times to navigate down the menu to
‘LED Indicator’. You will see this option highlight. If this function is
activated there will be a tick in the box.
5. Press the SHOOT / RECORD Button to either activate or deactivate it.
6. To exit, press the POWER ON / OFF Button twice. You will be
prompted to press the SHOOT / RECORD Button to confirm your
choice.
7.0 PICTURE SETTINGS
7.1 PHOTO MODE
Before you take a photo, look for a camera icon on the screen to
confirm you’re in the right mode.
If you are not in this mode press the POWER ON / OFF Button to
switch modes. Once you are in the correct mode, press the SHOOT /
RECORD Button on the top of the Unit to take a photo.
7.2 IMAGE RESOLUTION
You have the option of changing the Image Resolution through the
ZXM-AC2. You can change between 2, 5, 8, 12 and 16 Megapixels.
The higher the number, the higher the resolution and the more
detailed your photos will be. The ZXM-AC2 is defaulted to shoot at 16
megapixels.
To Next Page
Loading...
