16
6. Open your smartphone’s WiFi Settings and search for the device
name that is shown on the ZXM-AC2 screen. Click this name and
enter in the password (also on the screen). You can now access
the ZXM-AC2 through the App. When WiFi is connected, the LED
indicator light at the top of the Unit will slowly and continuously
flash red. ( See section 11.0 for App Information)
NOTE: When WiFi is connected to your smartphone, you cannot use
the functions on the ZXM-AC2 via the camera. However you
can manage functions via the App while the action camera
is in this mode. You can control functions via the ZXM-AC2
again once you have finished downloading your images and or
videos onto your smartphone through the App. Please refer to
section 12.1 for more details about how to use the App.
7. To exit out of WiFi mode, press the UP Button.
6.7 ROTATE IMAGE
You have the ability to flip the image vertically (upside down) when you
are using the ZXM-AC2, by turning on the Rotate Image function.
1. Press the SHOOT / RECORD Button to end recording (if required).
2. Press the POWER ON / OFF Button four times, this will open up the
Settings menu. Press the SHOOT / RECORD Button to activate the
Settings page.
To Next Page
Loading...
