25
8.0 VIDEO SETTINGS
8.1 VIDEO MODE
When you turn on the ZXM-AC2, it will automatically default to Video
Mode. A video camera icon on the screen will confirm this.
Once you are in the correct mode, to begin recording, press the
SHOOT / RECORD Button. The blue LED light on the left side of the
screen will start flashing when recording. You will also see a flashing
red dot on the screen next to the recording time.
To stop recording, press the SHOOT/RECORD icon again.
8.2 VIDEO RESOLUTION
You can change the Video Resolution between: 4K @ 30 FPS, 2.7K @ 30
FPS, 1080P @ 60 FPS, 1080P @ 30 FPS, 720P @ 90 FPS, 720P @ 60 FPS
and 720P @ 30 FPS. The ZXM-AC2 default setting resolution is 4K @ 30
Frames Per Second. To change this setting follow the steps below:
1. Press the SHOOT / RECORD Button to end recording (if required).
2. Press the POWER ON / OFF Button four times, this will open up the
Settings menu. Press the SHOOT / RECORD Button to activate the
Settings page. ZXM-AC2 video Settings is the first menu that comes up.
3. Resolution is the first setting on the list, you will see this highlighted.
Press the SHOOT / RECORD Button to open up this setting.
To Next Page
Loading...
