31
3. Press the SHOOT / RECORD Button to confirm. The file will now delete.
9.0
RESTORE DEFAULT SETTINGS
Selecting this setting will restore the ZXM-AC2 to Factory Default. All
setting adjustments you have made to the Unit will be erased.
If you need to restore to factory Settings, follow the below steps:
1. Press the SHOOT / RECORD Button to end recording if you are in
video mode and recording.
2. Press the POWER ON / OFF Button 4 times, this will open up the
Settings menu. Press the SHOOT / RECORD Button to activate the
Settings page.
3. Press the POWER ON / OFF Button 3 times, this will open up the
ZXM-AC2 hardware Settings menu.
4.
Press the DOWN Button 3 times on the right side of the Unit to
navigate down the menu to ‘Factory Reset’. Press the SHOOT
/ RECORD Button once to open up, you will be prompted with
‘Confirm’ or ‘Cancel.’
5. Press the SHOOT / RECORD Button to select your option.
6. To exit the Settings Menu press the POWER ON / OFF Button once,
you will be prompted to press the SHOOT / RECORD Button to
confirm.
To Next Page
Loading...
