21
To change the Image Resolution follow the below steps:
1. Press the SHOOT / RECORD Button to end recording if you are in
video mode and recording.
2. Press the POWER ON / OFF Button four times, this will open up the
Settings menu. Press the SHOOT / RECORD Button to activate the
Settings page.
3. Press the POWER ON / OFF Button once, this will open up the
ZXM-AC2 photo Settings menu.
4. As resolution is the first menu option, you will see this highlighted.
Press the SHOOT / RECORD Button to open this setting.
5.
Press the
UP / DOWN Button
to select the option you require, which
will highlight when selected. To select this option, press the SHOOT /
RECORD Button.
6. To exit the Settings, press the POWER ON / OFF Button three times,
you will be prompted to press the SHOOT / RECORD Button to confirm.
7.3 TIMER MODE
You are able to set the Timer Mode (to delay recording) on the ZXM-
AC2. You can change between: 3 seconds, 5 seconds, 10 seconds,
20 seconds and OFF. The ZXM-AC2 default setting is set to OFF. To
change this setting follow the below steps:
1. Press the SHOOT / RECORD Button to end recording (if required).
To Next Page
Loading...
