ZERO-X ZXM-AC2 - Page 22

22
2. Press the POWER ON / OFF Button four times, this will open up the
Settings menu. Press the SHOOT / RECORD Button to activate the
Settings page.
3. Press the POWER ON / OFF Button once, this will open up the
ZXM-AC2 photo Settings menu.
4. Press the DOWN Button once to navigate down to ‘Timer Mode’,
you will see this highlighted. Press the SHOOT / RECORD Button to
open up this setting.
5. Press the UP / DOWN Button to the option you require. To select this
option, press the SHOOT / RECORD Button.
6. To exit the Settings Menu, press the POWER ON / OFF Button
three times. You will be prompted to press the SHOOT / RECORD
Button to confirm you are exiting this function.
BEGINNERS TIP: By setting this default to OFF, the camera will only take one
photo at a time. The other options have a timed delay before taking a photo.
This is great for selfies or when you have no one else to take a photo for you.