27
3. Press the DOWN Button three times to navigate down to ‘Loop
Recording’ this will highlight when selected. Press the SHOOT /
RECORD Button to open this setting.
4.
Press the
UP / DOWN Button
until the option you require is
highlighted. To select this option, press the SHOOT / RECORD Button.
5.
To exit the Settings menu, press the POWER ON / OFF Button four
times, you will be prompted to press the SHOOT / RECORD Button to
confirm.
8.4 TIME LAPSE
When using the Time Lapse feature, the ZXM-AC2 will take a sequence
of photos over a period of time, merging them seamlessly into a sped
up video. There are 8 options to choose from: Off, 0.5 secs, 1 second, 2
seconds, 5 seconds, 20 seconds, 30 seconds and 60 seconds.
The ZXM-AC2 default setting is OFF. To change this follow the below
steps:
1. Press the SHOOT / RECORD Button to end recording if you are in
video mode and recording.
2. Press the POWER ON / OFF Button four times, this will open up the
Settings menu. Press the SHOOT / RECORD Button to activate the
Settings page. ZXM-AC2 video Settings is the first menu that comes up.
3. Press the down Button twice to navigate down to ‘
Time Lapse.
’ This
option will highlight when selected. Press the SHOOT / RECORD
Button to open this setting.
To Next Page
Loading...
