9
• Never dismantle the ZXM-AC2 or expose the internal battery cell.
• Do not dispose of the ZXM-AC2 in fire.
• Please dispose of the ZXM-AC2 mindfully and observe local regulations,
especially in regards to the safe disposal of the internal battery. Check your
local recycling facility for more information.
• Do not attempt to expose the internal battery cell.
• Only use a certified 5V 1A USB charger to charge the ZXM-AC2. Using non
certified chargers could potentially damage the ZXM-AC2, or the ZXM-AC2
battery and void the warranty.
• Do not let the battery charge overnight.
• If the ZXM-AC2 seems to still need charging after three hours, temporarily
remove it from its charger as the battery may overheat. Let it cool down for
30 minutes and try charging again.
5.1 CHARGING THE BATTERY
We recommend that you fully charge your ZXM-AC2 before use. A full
charge will take approximately 2.5 hours using a 5V 1A Charger.
The LED light on the back of the ZXM-AC2 indicates the status of the
Unit’s charging cycle. It will flash RED while charging. When the ZXM-
AC2 is fully charged the LED light will stay RED.
To Next Page
Loading...
