26
4. Press the UP / DOWN Button to the option you require, you will see
this highlight. To select this option, press the SHOOT / RECORD
Button.
5. To exit the Settings menu, press the POWER ON / OFF Button four
times, you will be prompted to press the SHOOT / RECORD Button to
confirm.
8.3 LOOP RECORDING
The Loop Recording function allows for the ZXM-AC2 to record
continuously, using footage intervals of 2, 3 or 5 minutes. When the
Loop Recording function is activated the ZXM-AC2 will delete the
oldest recorded loop file and replace it with the newest file when the
Micro SD card is full.
If Loop Recording is set to OFF, the ZXM-AC2 will record continuously
for 18 minutes as a single file. The ZXM-AC2 default setting is 5 minutes.
To change either the Loop Recording interval or to turn OFF Loop
Recording, follow the below steps:
1. Press the SHOOT / RECORD Button to end recording if you are in
video mode and recording.
2. Press the POWER ON / OFF Button four times, this will open the
Settings menu. Press the SHOOT / RECORD Button to activate
the Settings page. ZXM-AC2 video Settings is the first menu that
appears.
To Next Page
Loading...
