23
7.4 CONTINUOUS PICTURE MODE
Continuous Picture Mode is perfect if you want to take multiple
photos but you do not want to keep holding your camera. When
activated the ZXM-AC2 will take continuous photos with a set count
down between each photo. You can change between: 3 seconds, 10
seconds, 15 seconds, 20 seconds, 30 seconds and OFF. The ZXM-AC2
default setting is set to OFF. To change follow the below steps:
1. Press the SHOOT / RECORD Button to end recording if you are in
video mode and recording.
2. Press the POWER ON / OFF Button four times, this will open up the
Settings menu. Press the SHOOT / RECORD Button to activate the
Settings page.
3. Press the POWER ON / OFF Button once, this will open up the
ZXM-AC2 photo Settings menu.
4. Press the DOWN Button two times to navigate down to
Continuous
Picture Mode
, you will see this highlighted. Press the SHOOT /
RECORD Button to open up this setting.
5. Press the UP / DOWN Button to the option you require, you will see
this highlight. To select this option, press the SHOOT / RECORD
Button.
6.
To exit the Settings Menu, press the POWER ON / OFF Button
three times, you will be prompted to press the SHOOT / RECORD
Button to confirm.
To Next Page
Loading...
