220
PLANNED TECHNICAL MAINTENANCE
INSPECTION TRACTOR MAINTENANCE 1
After engine hours
Inspection and maintenance operations
ENGINE
Engine oil exchange X X Every 200 hours
Engine oil cleaner exhcange X X Every 200 hours
Retightening the cylinder head nuts X
Valve clearance inspection and adjustment X X X X X X
Inspection of engine lubrication pressure - after starting X Every 10 hours
Inspection for level and lubrication syst’ m leaks X Every 10 hours
Cleaning the turbocharger compressor housing and intake manifold X X
Inspection of turbocharger for leakage and bearing play X X
Inspection for water pump bearing play X X
ENGINE ACCESSORY
Inspection for leaks and function of hydraulic system clutch control X Every 10 hours
Check of coolant level and cooling system leakage X Every 10 hours
Check of fuel system leakage X Every 10 hours
1 Air cleaner maintenance X X Every 200 hours
2 Cleaning the radiator fins by pressure air X X Every 200 hours
Cleaning the AC condenser fins by pressure air Every 50 hours
3 Coolant exchange X X X X X
Inspection and adjustment of injection pump X X
Inspection for turbocharger lub. System leaks X X X X
Inspection for exhaust
manifold tightness X X X X X X X X X X X X
Inspection for injector opening pressure and nozzle function X X X X X X X
Fuel cleaner cartridge exchange X
X X X X X X X X X
Drive belt tension inspection and adjustment X X Every 200 hours
Fuel course cleaner inspection and cleaning X X Every 200 hours
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
