Zetor 10641 Forterra turbo - Shifting from Higher to Lower Gear; Shifting from Lower to Higher Gear Speed; Three Stage Hi-Lo (Torque Multiplier)

71
OPERATION
F 97 F 98 F 99
SHIFTING FROM LOWER TO HIGHER
GEAR SPEED
Depress the clutch pedal (clutch
disengaged). In the same time loosen
the throttle pedal and shift the proper
higher gear speed. Fluently release the
clutch pedal (the clutch starts engaging)
and simultaneously increase engine
speed.
SHIFTING FROM HIGHER TO LOWER
GEAR
Depress the clutch pedal and shift the
shifting lever through neutral position to
lower gear speed.
Note: So-called double clutching can be
used for increasing the life of
synchronizers when shifting from higher
to lower gears.
THREE STAGE HI-LO (TORQUE MUL-
TIPLIER)
Three stage Hi-
Lo is a standard
equipment of all tractor types.
The particular stage of Hi-Lo is shifted
by means of two push buttons located
on the shifting lever grip.
Shifting is done without depressing the
travel clutch (power shift).
The shifting alone is automatic even
under the load of tractor.
H
gear ratio 1,00 (Hi)
M
gear ratio 1,16 (middle)
L
gear ratio 1,34 (
Lo)
PDF byl vytvoren zkusebnı verzı FinePrint pdfFactory http://www.fineprint.cz