Zetor 10641 Forterra turbo - Drawbar of Combined Pick up Hitch; Exchange of Hook for Drawbar; Pick up Hitch Combined with Drawbar

94
TRANSPORTATION
F 138 F 139 F 140
PICK UP HITCH COMBINED WITH
DRAWBAR
Pick up hitch is intended for coupling the
two-wheel trailers with yoke corres-
ponding to ISO 5692 (the internal yoke
eye diameter is 50 mm and eye height is
30 mm). Pick up hitch hook is hydra-
ulically raised and lowered by means of
length adjustable telescopic links.
The allowed vertical static load of hitch is
24 kN at tractors Z 8621 - 10641.
The allowed vertical static load of
hitch is 30 kN at tractors
Z
11641.
Pick up hitch is capable for pulling the
maximal traction force.
EXCHANGE OF HOOK FOR DRAW-
BAR
The hitch is also equipped with drawbar
that is in the opposite side of hitch hook.
Drawbar can have three working
positions. Change of hitch hook for
drawbar is carried out by lowering the
hitch hook carrier into position suitable
for removing pins (a). Afterwards the
hitch hook is removed from the carrier
and inserted into such position that the
swinging drawbar clevis is in front of
carrier.
DRAWBAR OF COMBINED PICK UP
HITCH
Maximal vertical static load is 12 kN.
Drawbar is capable for pulling the
maximal traction force of tractor.
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz