96
TRANSPORTATION
F 143a F 144 F 145
4. Apply the back-pressure into hydra-
ulic cylinder within lowering opera-
tion. Carrier hooks come back into
their operating position by this way.
Than return the lever into neutral
position.
5. Attach or disattach the trailer.
6. Lift hydraulic arms into upper posi-
tion.
7. Hooks snap under pins;
8. Lower hydraulic arms a little.
9. Telescopic links must not be
stretched! Keep the minimal play
(x)!
DRAWBAR
Drawbar is height adjustable by the
hydraulic lifting system within its hole
lifting range. Only agricultural imple-
ments loading permanently the drawbar
downwards can be attached to the
drawbar. Maximal vertical static load is 8
kN.
Disassemble the trailer hitch with
support when working with the
drawbar.
TRAILER IMPLEMENTATION
Tractor must be implemented only with
suitable tractor trailer because tractor
service brakes and air brakes of trailer
must match together.
Static rear axle load must not exceed the
max. allowed axle load of tractor when
implemented with two wheel trailer.
PDF byl vytvořen zkušební verzí FinePrint pdfFactory http://www.fineprint.cz
To Next Page
Loading...
