ZF AV 110 - Page 130

8. Place air spring (2) onto the spring carrier.
9.
Apply 0666.690.078 [Sealing compound]
onto the thread of the hexagon screw (1).
10. Fix air spring (2) with hexagon screw (1).
Tightening torque: 90 Nm
Fig. 269
11. Connect shock absorber (5) to the spring
car
rier.
12. Push disk (1), joint ring (2) and disk (3) at the
thread of the shock absorber.
13. Fix shock absorber with hexagon nut (4).
Tightening torque: 70 Nm
Fig. 270
14. Horizontally suspend the lower longitudinal
contr
ol arm (2) with the lifting device.
15. Fix the lower longitudinal control arm (2) with
hexagon screws (1).
Tightening torque: 390 Nm
Fig. 271
Assembly
130
EN 4472.751.001 - 2015-11