ZF AV 110 - Page 46

8. Use 5870.100.069 [Assembly fixture] to press
shaf
t seal from the tapered roller bearing.
Fig. 44
9. Press tapered roller bearing and shaft seal
fr
om the hub.
Fig. 45
10.
Risk of injury due to parts flying away.
Slight or moder
ate injury possible.
ð
Wear protective goggles.
Force out bearing outer rings.
11.
Press wheel studs from the hub.
Fig. 46
Dismantling
46
EN 4472.751.001 - 2015-11