5.14 Option add-on modules
An additional module can be retrofitted in the slot provided if required (mounting
operating instructions of the additional modules).
The range of additional modules is constantly being extended and adapted to market requirements.
The currently available additional modules can be requested from ZIEHL-ABEGG.
Examples for currently available additional modules
Type Part-No. Function
AM-MODBUS
349070 Communication module
To integrate the device into a MODBUS network. The members can be
addressed automatically by an additional connection.
The device can be communicated with using the hand-held terminal type A-
G-247NW. Connection by cable via the MODBUS interface or wirelessly by
radio (AM-MODBUS- W).
AM-MODBUS *
349045
AM-MODBUS-W *
349050
AM-CAN-OPEN *
349064 CANOPEN module
To integrate the device into a CANOPEN network.
AM-LON *
349049 LON module
To integrate the device into a LON network.
AM-PROFIBUS *
349063 PROFIBUS module
To integrate the device into a PROFIBUS network.
AM-ETHERCAT *
349071 ETHERCAT module
To integrate the device into an ETHERCAT network.
* For basic operation with limited MODBUS access
6 Start-up
6.1 Prerequisites for commissioning
Caution!
1. You must mount and connect the device in accordance with the operating instructions.
2. Double check that all connections are correct.
3. The mains voltage must match the information on the rating plate.
4. The rated current on the rating plate will not be exceeded.
5. Make sure that no persons or objects are in the hazardous area.
Operating Instructions PMIcontrol Basic-M – model series FSDM5...46 Start-up
L-BAL-E300-GB 1905 Index 001 Part.-No.
35/48
To Next Page
Loading...
Need help?
General
