Zip HydroTap BCS160 - Model BCS 160;175

801910 - Zip Sparkling HydroTap - Installation Instructions - July 2014 - V1.00 Page 29 of 40
6.3 Models BCS160/175
Installation Instructions
Note: The connection tubes supplied with the tap head assembly and cold inlet CANNOT be lengthened.
: Not required for standard BCS HydroTap models.
Min.
50 mm
side
Clearance
400mm
Note:
All plastic
tubes must be
trimmed to size.
They must have
a constant fall
back to the unit.
RED
CLEAR
BRAIDED
Max.
1000mm
Max.
500mm
Note:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the
underbench unit
according to the
hose and cord
lengths supplied
POWER
CORD
USB
CHILLED
OUTLET
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT BYPASS
OUT
SPARKLING
OUTLET
CO2
IN
GAS IN
BLUE
WHITE