Page 14 of 40 801910 - Zip Sparkling HydroTap - Installation Instructions - July 2014 - v1.00
1.10
Cut a 50mm hole in the bench / sink top.
SINK TOP
1.9
50mm
NOTE: make sure the tap location will allow the
nozzle to drain into the sink.
O-RING
SINK TOP
Fit the O-ring to the underside of the AIO tap
then pass all hoses through the 50mm hole.
All-In-One Tap
Mains Installation
O-RING
BASE
BLOCK
SPIDER
BASE
BLOCK
NUT
USB CABLE
ALL THREAD
ROD
To Next Page
Loading...
