Page 36 of 40 801910 - Zip Sparkling HydroTap - Installation Instructions - July 2014 - v1.00
OPEN Position
CLOSED Position
ON
OFF
Stop cock
operation
7.3 - Boiling Calibration (Boiling models)
Commissioning
7.4 - Booster
•
Press the calibration button and the system will
commence the Boiling calibration procedure. This
will take approx 5-6 minutes.
•
Upon completion, a Booster reminder screen will
appear and allow you to return home by pressing
the [Home] button.
•
Check the Date and Time settings (See Note
below)
NOTE: failing to make the correct selection for the “Booster”, will affect product performance.
NOTE: Depending on your location you may need to re-set the internal clock. See section G of the user
guide to check and if necessary, reset the Date and Time for your time zone.
To Next Page
Loading...
