14 2.8-inch Linux Visible Light Product User Manual
Register password
Select Password to enter the password registration page. Enter a password and re-enter it. Select M/OK. If the two
entered passwords are same, the system will return to the New User interface.
Note: The password may contain one to eight digits by default.
Register user photo
When a user registered with a photo passes the authentication, the registered photo will be displayed.
Select User Photo, Select M/OK to take a photo. Then Select ESC to exit and return to the New User interface.
Note: While registering a face, the system will automatically capture a picture as the user photo. If you do not want
to register a user photo, the system will automatically set the picture captured as the default photo.
To Next Page
Loading...
