1.5.2. 1:1 Verification
The device can also perform a 1:1 Verification. This kind of verification consist in the
employee identifying itself first by Code and registering the punch with Fingerprint or
Card after this identification. This punch data is compared only to the identified employee
data. This is used to provide an extra layer of security, or when the Fingerprints or Cards
are difficult to read by the device.
The punching operation when this kind of identification is selected is the following:
1. Select the event that the punch is going to be set, either from the desktop, either
from + Events. This is optional. If no attendance event is selected, a default “0”
attendance event is going to be selected. An attendance event in the Desktop can
be selected or in the + Events screen.
Desktop
+Events
2. Click on Keyboard to enter the employee Code
To Next Page
Loading...
Need help?
General
