ZKTeco ZPAD+ User Manual

ZPAD+ User Manual
12
1.5.3. Force Attendance Event Selection
In the previous section it is specified that the selection of an attendance event prior to the
punching is optional. The device can be configured so it is mandatory to set an attendance
event prior to the punching. If this is activated (View T&A Settings – Punch Settings)
section trying to set a punch without selecting an attendance event first will show the
following error on screen.

ZKTeco ZPAD+ Specifications

General

Brand	ZKTeco
Model	ZPAD+
Category	Touch terminals
Language	English