8.3. Push Settings
1. Enable Push Protocol. The push protocol lets the device communicate with the
software ZKTimeCloud. This is a cloud-based software that permits a thorough control
of all the T&A in a company. Please ask your distributor sales representative for more
information.
2. Push Server Address. Internet address where the ZKTimeCloud server is located.
3. Push Server Port. Communication configuration aspect in order to be able to connect
to a ZKTimeCloud server.
4. Timeout. Communication configuration aspect in order to be able to connect to a
ZKTimeCloud server.
5. Enable HTTPS. Makes it mandatory to the device to only connect to a ZKTimeCloud
server via a secured connection.
8.4. Web Server
To Next Page
Loading...
