H.264 Super Digital Video Recorder User Manual
63
2. User: need to register a user name, and then enter the user name and password to login; need to
add the device after login (enter “device management” page can finish adding device); after finish
adding device, the added device will appear in the left column of “my devices”. Click on the current
equipment for preview, playback, configuration and operation
Picture 5.4 Remote operation
5.3 Client CMS software operation
CMS software is used on the same PC, support control multiple DVRs at the same time.
Please take out the CD-ROM in the accessories, copy the CMS install software in the CD-ROM
After installation on the local PC, double click the “CMS”, open the control interface appears in Picture
5.3, default without password, the client can set the login password (Note: The password for the CMS
client password, non-DVR login password).
Picture 5.5 CMS login
After enter into CMS interface, shown in Picture 5.4:
To Next Page
Need help?
General
