ZMODO ZMD-DT-SCN4 User Manual

H.264 Super Digital Video Recorder User Manual
33
Picture 4.3 Tour setting
4.3 Record
Set recording parameter (main stream) and network parameter (extra stream) of video and audio
signal.
Set DVR’s recording plan.
Note：There is at least one read-write hard disk.
Picture 4.4 Record config
Channel: Choose the corresponding channel number to set the channel. Choose the all option to
set the entire channels.
Set: Recording parameter (main stream) and network parameters (extra stream) illustrate
Video/Audio: Set whether to record video and audio simultaneously.
Resolution: Set recording resolution. The Higher resolution, the better recording quality, occupies
more HDD capacity. Conversely, the lower resolution, the worse recording quality,
occupies less HDD capacity.
Frame Rate (FPS): set recording FPS; the higher recording FPS, the better fluency of recording
images and occupies more HDD capacity. Conversely, the lower recording FPS,
the worse fluency of recording images and occupies less HDD capacity.
Bit Rate Type: Set whether recording stream changes automatically according to image changes
Adjust recording quality, six grades are optional
Quality: Adjust the video quality, grade six kinds of optional.
Bit Rate (Kb/S): set recording stream statics under fixed stream state; The Higher Stream statics,
the better recording quality and occupies more HDD capacity. Conversely, the

ZMODO ZMD-DT-SCN4 Specifications

General

Brand	ZMODO
Model	ZMD-DT-SCN4
Category	DVR
Language	English