H.264 Super Digital Video Recorder User Manual
43
Picture 4.21 Alarm
4.5.1 Motion Detect
When system detects the motion signal that reaches the set sensitivity, the motion detect alarm is
on and the linkage function is turned on.
Note: click advanced button can back to upper page, to display surveillance screen, copy, default,
recording setup
Picture 4.22 motion detect
Channel: Choose the set motion detect channel.
Enable: means that the motion detect function is on.
Sensitivity: Choose in the six options according to the sensitivity.
Region: Click setup and enter the set area. The area is divided into PAL22X18. Green block means
To Next Page
Loading...
