ZMODO ZMD-DT-SCN4 User Manual

H.264 Super Digital Video Recorder User Manual
51
【remote access configuration】
To configure remote network device name, device type, channel, address, port, user name and
password
Configuration name: set network device name
Device type: set network device type
Remote access channel: when device type is DVR or NVR, you need to set specific DVR or NVR
channel number which signal get. When device type is IPC, default “1”
Stream: set main stream or sub stream to connect the network device
Device address: set IP address of the network device
Port: set port number of the network device
User name: set user name to login the network device
Password: set password of network device
Search: system automatically search available network device in LAN (which is convenient to
add new network device)
Note: when binding signal to all digital channels, need to make sure resolution of the bind network
device is lower than the maximum resolution of the digital channel, or the images can’t be displayed.
【Channel status】
Show the maximum resolution of all digital channels, connected signal resolution and connection
status. (4.36)
Picture 4.36 channel status
4.7 System
Set the system parameters such as HDD Manage, PTZ Config, GUI Display, Backup, Account,
Device Info, Restore, Auto Maintain, Upgrade and Import/Export.

ZMODO ZMD-DT-SCN4 Specifications

General

Brand	ZMODO
Model	ZMD-DT-SCN4
Category	DVR
Language	English