Additional equipment 36
7.8 HYDRAULIC INSTALLATION COVERS
If the chassis is fitted with a CNG installation, the vehicle is equipped with extra hydraulic
installation covers on front frame of the body. Covers protect hydraulic installation from high
temperatures generated by CNG installation.
Fig. 7.6 Hydraulic installation covers on the front frame
It is important to control if there is no residual waste behind the covers. To check it, once a
month remove the lower part of the cover (mounted with wing screws) and remove any
waste. Depending on the available space, it may be necessary to tilt the driver's cab for easy
access (see Chassis manual).
Fig. 7.7 Lower part of covers with wing screws
To Next Page
Loading...