Maintenance 42
a) b)
Fig. 8.1 Sliding block a) new, b) worn
Regular service inspections of the vehicle are recommended according to the schedule contained in the
service book.
8.3.1 Table of consumables
Hydraulic oil HLP 32 ISO mineral oil
Hydraulic oil based on synthetic esters
(HEES)
Central lubrication
system
liquid grease NLGI 000,00,0 class
according to DIN 51818
grease NLGI 1,2 class according to
DIN 51818
The factory applied hydraulic oil complies with DIN 51 519.
8.4 CLEANING
Daily cleaning of the tailgate and the body is recommended, as well as cleaning the vehicle
from the outside. Waste lying on the tailgate or in the body leads to an unpleasant odour or
avoidable corrosion.
Steps of cleaning vehicle elements:
1. Turn on the body.
2. Set manual mode on the terminal.