ZOJE ZJ5821 - Page 64

7. Interface of Parameter Setting Mode
No. Functions Description Range Changing Default
Step Setting
U580
Upper thread
taking-up action
time
0~200：Start time adjustment of
upper thread taking-up
0~200 5 0
U581
Upper thread
tension adjustment
0~250：Adjust upper thread
solenoid current
0~250 5 230
U586
Fast moving time
adjustment
Adjust fast frame-moving time
-90~100 10 0
U588
Frame-moving
adjustment 2
Adjust the X frame-moving angle
at frame-moving at 4 or 5
-50~100 1 0
U650
Time to buzzer
stop
0：OFF
Buzzer keeps ringing from the
start of error to the release of it
5~15：At the error, the buzzer stop
ringing after the set time
0~15 5s 0
U651
Motor excitation
status at error
0：OFF
At unrecoverable problem, the
excitation of pulse motor will be
off.
1：ON
At unrecoverable problem, the
excitation of pulse motor remains.
0~1 1 0
U752
Adjustment of X
position on knife
The set value is the adjustment of
X position on knife, which will be
added into entire pattern program.
-0.50~0.5
0
0.05mm 0
U850
Sewing machine
head configuration
0：-00
Set configuration as -00
1：-01
Set configuration as -01
2：-02
Set configuration as -02
0~2 1 1
U852
Radial Hole
Presser
0：OFF
Use general presser (except that
of radial hole)
1：ON
Use the special program for radial
hole presser. The displayed is the
special parameter for radial hole.
0~1 1 0
U853
Language
0：Chinese
1：English
0~1 1 0
U854 Back light auto Off
0：OFF
No auto off
1：ON
Auto off
0~1 1 0
U855
Backlight auto off
wait time
Set the waiting time of the
backlight auto off
1~9 1 Min 3
U856
Button display
style
0：Sty1 Style 1
1：Sty2 Style 2
0~1 1 0
U857 Voice Volume
30~63：adjust the volume of voice
30~63 1 50
U858
Password setting
effective
0：Invalid
1：Valid
0~1 1 0
U910
Sewing board
position adjustment
Adjust the position of sewing board
-100~100 1 0
U911 Air hammer down Set adjustment of hammer lowering 0~60 1 15
55