Operating the H4essential from a
smartphone/tablet
The H4essential can be operated wirelessly from a smartphone or tablet by connecting a BTA-1 or other
dedicated wireless adapter and using the dedicated H4essential Control app.
NOTE
• The H4essential Control app must be installed on the smartphone or tablet beforehand. The H4essential
Control app can be downloaded from the App Store. Refer to the manual for the H4essential Control app
for details about app settings and operation procedures.
• The H4essential cannot be controlled wirelessly from a smartphone or tablet during audio interface
operation (→ Using as an audio interface).
• An H4essential cannot have both H4essential Control and an UltraSync BLUE connected at the same
time.
1. With the H4essential power off, remove the REMOTE connector cover on the right side. Then, connect
the BTA-1 or other dedicated wireless adapter.
2. Slide toward until the display becomes active and the power turns on.
130
To Next Page
Loading...
Need help?
General
