Turning the power on/off
Turning the power on
1. Slide toward until the display becomes active.
After the Startup Screen is shown, the Home Screen will open on the display.
The first time the power is turned on after purchase as well as when the H4essential has been reset
to factory defaults, setting screens for the guide sound, display language and date and time will be
shown. Make these settings. (→ Setting the guide sound (first time starting up), Setting the language
shown (first time starting up), Setting the date format (first time starting up), Setting the date and time
(first time starting up), Setting the type of batteries used (first time starting up))
NOTE
• The H4essential can be set so that its power will automatically turn off if it is not used for a set amount of
time. (→ Setting the time until the power turns off automatically)
• If “No SD Card!” appears on the display, confirm that a microSD card is inserted properly. (→ Inserting
microSD cards)
• If “Invalid SD Card!” appears on the display, the card is not formatted correctly. Format the microSD card
or use a different microSD card. (→ Formatting microSD cards, Inserting microSD cards)
36
To Next Page
Loading...
Need help?
General
