Making recording settings
Setting the sample rate
The sample rate used to record files can be set.
1. On the Home Screen, use to select (Rec Settings) and press .
This opens the Rec Settings Screen.
2. Use to select “Sample Rate” and press to confirm.
3. Use to select a sample rate and press to confirm.
You can select from the following sample rates.
44.1 kHz, 48 kHz, 96 kHz
NOTE
• The only bit depth that can be used for recording is 32-bit float.
• To use the H4essential to record while using it as an audio interface, set the sample rate to 44.1 kHz or 48
kHz. (→ Using as an audio interface)
63
To Next Page
Loading...
