Zoom H4essential - Making Output Settings: Adjusting Output Level Control

Making output settings
Settings can be made for output to the built-in speaker, headphones and connected devices.
When connecting another device, minimize its input gain and use an audio cable to connect its external mic
jack to the PHONE/LINE OUT jack on the H4essential.
HINT
When output to an external device is unnecessary, disconnecting the cable from the PHONE/LINE OUT jack
can increase the amount of operation time when using batteries.
Changing how the output level is adjusted
The way the output level is adjusted can be changed.
When connecting another device, for example, select “Fixed” if you do not want use of to change
the volume. This will cause sound to be output at the level set as explained in “Adjusting the fixed level”.
1. On the Home Screen, use to select (Output) and press .
This opens the Output Settings Screen.
2. Use to select “Volume Control” and press .
55