Combine multiple tracks into 1~2 tracks
Combine multiple tracks into one monaural or stereo file.
Using BOUNCE, this creates a new file in the same project.
1
Press [PROJECT].
6
5
Press [ENTER].
HINT
• “Bounce” means combining audio data from
several tracks and files together into one stereo
or monaural file. This is also called “ping-pong
recording.”
• To also record the signal of the track(s) that the
bounce is being recorded to, set “REC TRACK”
to “Play” in the BOUNCE Menu as described at
Step 4.
• Once the bounce is executed, a new le will be
created in the same project.
• If you set the bounce destination to a monaural
track, the recorded signals are mixed to
monaural. If set to a stereo link track pair, the
recorded signals are mixed to stereo.
NOTE
• You can cancel a bounce using the [UNDO/
REDO] key.
• If you bounce 2 monaural tracks to stereo, set the
PAN of the odd number track to L 100 and the
even number track to R 100.
Ref: Mix down
P.40, 42
Set whether the track that is
overwritten by the bounce
recording is muted or not.
Mute: Set the bounce destination track to
be silent (initial setting).
Play: Set the bounce destination track to
play and be included in the bounce.
Select
2
Press [ENTER].
PROJECT
>REC SETTING
Change
menus
3
Select
Press [ENTER].
REC SETTING
>BOUNCE
4
Select
BOUNCE
REC TRACK: Play
Settings for the bounced tracks
PROJECT>REC SETTING>BOUNCE
Bounce (recording)
4
Start from the top screen.
7
8
9
Press and hold [EXIT] to
return to the top.
Select OFF to exit bounce mode.
3
Press [SWAP/BOUNCE].
Mix down/Bounce
1
Press [PLAY/MUTE/REC] of the bounce
destination track.
Press it 1-2 times until the
green light turns on.
Green light on: playback enabled (PLAY)
2
Press [PLAY/MUTE/REC] on the tracks
bounced.
Press 1-2 times each until
the light turns off.
Light off: MUTE (no sound)
3
Press [REW] & [Stop] at
the same time to return the
counter to the head.
Playback the track after bouncing
Press [PLAY] to start playback.
4
5
Press [STOP] to end the bounce.
Press [REW] & [Stop] at
the same time to return the
counter to the head.
Press [REC] and then
[PLAY] to start recording.
Green light onRed light on
1
Set tracks that you want to bounce
to playback.
Press the [PLAY/MUTE/
REC] 1-2 times until the
green light turns on.
Green light on: playback enabled (PLAY)
2
Select destination track(s) for the
bounce.
Press [PLAY/MUTE/REC]
1-2 times until the red light
turns on.
Red light on: record enabled [REC]
Bounce (preparation)
Adjust the mix balance (audition)
Press [PLAY] to start playback.
1
Adjust the mix balance including
REC LEVEL, volume, PAN and EQ
for each track.
Make sure that the red
(0 dB) signal does not
light on the MASTER
level meter.
2
Press [STOP] to stop playback.
3
>REC SETTING
>BOUNCE
>REC TRACK: Play
.
.
.
Change
menus
Select
>BOUNCE
.
SWAP/BOUNCE
> BOUNCE
Change
menus
Set On/Off
Press [ENTER].
Select
On
.
BOUNCE
On
Press [ENTER].
Proceed to the next step or cancel
BOUNCE icon
appears on display
To Next Page
Loading...
