Changing the SD card while the power is on
You can change the SD card with the power on. You might need to change an SD card when using the
R16 if the remaining capacity of the inserted card becomes low, or when you need to import data from a
previously recorded SD card.
You can format SD cards for use with the R16, deleting all the data on it, and check SD card
capacity (remaining space).
Formatting SD cards and verifying card capacities
SD CARD
Format?
6
Format the SD card for use.
Press [ENTER].
8
Save to No.011
Save?
Save the current project.
Press [ENTER].
SD CARD
Format?
4
Execute.
Press [ENTER].
7
SD CARD
Load?
Load a project on the card.
Press [ENTER].
Verify SD card remaining capacity
TOOL>SD CARD>REMAIN
Save current R16 project to the SD card
SD CARD DATA>SAVE
Load the SD card to use in the R16
SD CARD DATA>LOAD
Format SD card and delete all data
TOOL>SD CARD>FORMAT
HINT
• Insert an unformatted SD card and execute when
“Format?” appears. Then options to [SAVE] and
[LOAD] the present project will follow.
NOTE
• Release the write-protection lock of the SD card
before inserting it.
• [SAVE] includes various data for the project in
use, but no audio data is saved.
SD CARD REMAIN
054:06:00/15317.7MB
Remaining recording
time for the current
recording format
Remaining
capacity of
the card
7
Select the project to save to.
Save to
No.011:PRJ011
Press [ENTER].
Save destination project number: name
NOTE
• If you insert an SD card that has not been
formatted for use with the R16, the “FORMAT”
menu opens automatically.
• If you format an SD card, all its data will be
permanently erased.
• When you format an SD card, all data on the card
will be deleted, and folders and files exclusively
for R16 use will be created.
SD card SD card
1
Press [TOOL].
1
Press [TOOL].
1
Press [TOOL].
4
Insert SD CARD
Eject SD card.
5
Insert another SD card.
SD CARD
Format?
SD card is new and not formatted for the R16.
SD CARD DATA
[LOAD] SAVE
SD card formatted for R16.
Data structure of R16 SD cards
PROJ000
SYS
PRJDATA.ZDT
ZOOM.ZDT
AUDIO
EFXDATA.ZDT
The highest-numbered project on the inserted
SD card is loaded.
Change
menu
Select .
3
SD CARD
>EXCHANGE
Remove SD CARD
Card removal
possible
Press [ENTER].
>EXCHANGE
Select .
2
TOOL
>SD CARD
Press [ENTER].
>SD CARD
Change
menu
6
Select .
SD CARD DATA
[LOAD] SAVE
Press [ENTER].
[LOAD]
Change
menu
6
Select .
SD CARD DATA
LOAD [SAVE]
Press [ENTER].
[SAVE]
Change
menu
Select .
2
TOOL
>SD CARD
Press [ENTER].
>SD CARD
Change
menu
Select .
3
SD CARD
>FORMAT
Press [ENTER].
>FORMAT
Change
menu
Select .
2
TOOL
>SD CARD
Press [ENTER].
>SD CARD
Change
menu
Select .
3
SD CARD
>REMAIN
Press [ENTER].
>REMAIN
NOTE
• If the remaining capacity of an SD card is less
than the amount of recording data, recording will
fail. Change the card before you run out of space.
Ref. : Importing data from USB
memory to an SD card/
Saving data from an SD card
to USB memory
: Operation without an SD card
P.74
P.12
To Next Page
Loading...
