Zoom R16 - Dividing Files; Splitting Files into Two Parts

Tool>System>LCD>Light/Contrast
67
68
Adjusting the display
You can adjust the backlight and contrast.
Turning the backlight On/Off
TOOL>SYSTEM>LCD>LIGHT
Adjusting the contrast
TOOL>SYSTEM>LCD>CONTRAST
HINT
Turn the back light off to conserve the batteries.
System System
Select a number.
5
Press [ENTER].
Change number
Project>Rec setting>Bit length
Recording format bit rate setting
Usually CDs are recorded in 16-bit, 44.1 kHz format, but with the R16 you can also use higher
quality 24-bit recording.
1
Press [PROJECT].
Setting and changing the bit rate
PROJECT>REC SETTING>BIT RATE
1
Press [TOOL].
TOOL
>TUNER
Change
menu
1
Press [TOOL].
TOOL
>TUNER
Change
menu
HINT
• If you are overwriting a recording, you cannot
change this.
• This setting is stored for each project.
• The initial setting is 16bit.
• If you use 44.1 kHz/24-bit, you will have to convert
to 16-bit to create an audio CD.
Select bit number.
4
Press [ENTER].
BIT LENGTH
16bit
16bit – 24bit
Select .
2
PROJECT
>REC SETTING
Change
menu
Press [ENTER].
>REC SETTING
Change
menu
Select
3
REC SETTING
>BIT LENGTH
Press [ENTER].
>BIT LENGTH
.
Select .
2
Press [ENTER].
TOOL
>SYSTEM
>SYSTEM
Select .
3
Press [ENTER].
SYSTEM
>LCD
Change
menu
>LCD
Select .
4
Press [ENTER].
LCD
>LIGHT
Change
menu
>LIGHT
LIGHT
On
Select .
5
Press [ENTER].
Turn On/Off
On
Backlight on (default setting)
Off
Backlight off
ON/OFF
Select .
2
Press [ENTER].
TOOL
>SYSTEM
>SYSTEM
Select .
3
Press [ENTER].
SYSTEM
>LCD
Change
menu
>LCD
4
Select .
Press [ENTER].
LCD
>CONTRAST
Change
menu
>CONTRAST
CONTRAST:3