Zoom R16 - Project Overview and Protection; Understanding Project Data and Contents; Project Protection Procedures

Project>New Project>Select/Project>File
57
58
Create a new project
With the R16 you can create up to 1000 projects on a single card. You can also transfer the settings of
the previous project to a new project.
Selecting projects and files
You can select a project for recording, playback and editing from the top screen.
You can also select files for playback and assign them to tracks.
Select a project
PROJECT>SELECT
HINT
When the R16 [POWER] switch is turned ON, the
project loaded the last time the unit was used will
be loaded automatically. (If you have changed SD
cards, then the last project used on the inserted
card will be loaded.)
NOTE
You can only playback and record to the project
that is currently loaded. You cannot load and use
multiple projects at the same time.
Change menu
PROJECT
>SELECT
1
Press [PROJECT].
1
Press [PROJECT].
No.002:PRJ002
Load?
Press [ENTER].
4
Load the project.
HINT
At Step 3, you can change the name of the new
project.
Ref.: Changing names
P.43
Ref.: Track assignment
P.23
3
Select the project.
Change
project
Press [ENTER].
PROJECT SELECT
No.002:PRJ002
Select a file
PROJECT>FILE
1
Press [PROJECT].
Project Project
No.003:PRJ003
Create?
Press [ENTER].
5
Create the project.
Select whether to use the settings
from the last project.
4
Press [ENTER].
Change menu
SETTING?
[CONTINUE] RESET
Select to use default settings
Press [ENTER].
3
Confirm the project name.
New project name
Blinks
New project number
Change the
name to be
saved
Project No.003
P RJ003
NOTE
You can use the settings and values of the last
project in the new one or use the R16 default
settings.
Settings carried over with CONTINUE
• BIT LENGTH setting
• INSERT EFFECT settings
• SEND RETURN EFFECT settings
• Track status (PLAY/MUTE/REC) settings
• BOUNCE settings
• REC TRACK settings
• Track parameter settings
• METRONOME settings
[RESET]
Use default setting values for every item
3
Select the file.
TRACK15
M15TR000 [TR1]
Select file.
Change track
or use
[1 - 8] and
[MASTER]
status keys
*If you want to listen to a file for confirmation,
you can use the following keys.
Playback: [PLAY] key
Stop: [STOP] key
Fast forward: [FF] key
Rewind: [REW] key
＋
Zero return:
[STOP] and [REW] keys
Moving to a marker:
[>>|] and [|<<] MARKER keys
PROJECT
>NEW [SD]003:22:52]
Press [ENTER].
Select
2
>NEW
.
2
PROJECT
>SELECT
Press [ENTER].
Select
>SELECT
.
Select
2
Press [ENTER].
PROJECT
>FILE
Change menu
>FILE
.
Change menu
Change menu