WET
(Default value)
The input signal will be recorded
to the track after it passes through
the insert effect.
DRY
The input signal will be recorded
to the track before passing
through the insert effect. However,
the input signal monitored from the
OUTPUT and PHONES jacks will
pass through the insert effect first.
Effect ON/OFF switch
press [ENTER].
When “INSERT EFFECT Off” is displayed,
Using the insert effect only for monitoring Project overview & project protection
By applying an insert effect only to monitoring, unaffected input signals can be recorded to tracks. A project stores data and elements necessary for music playback. The “PROTECT” function allows you
to prevent the alteration of a completed project.
PROJECT EDIT
>PROTECT
Change
menu
Select
3
Press [ENTER].
>PROTECT
.
Turn ON/OFF
PROJECT PROTECT
On
Select
4
Press [ENTER].
>ON
.
Select
.
>REC SIGNAL
4
No.00:Standard
>REC SIGNAL
Press [ENTER].
.
Select
DRY
5
Press [ENTER].
REC SIGNAL
Dry
Change setting
HINT
• The settings made here will be stored project by
project.
• If necessary, restore the initial “Wet” setting before
recording other parts.
CLEAN
No.15:Standard E
2
Select the Algorithm/Patch.
Change patch
Change
algorithm
Using the insert effect only
for monitoring
By default, when an insert effect is
applied to an input signal, the signal
with the effect is recorded to the track.
However, when desired, you can apply
the insert effect only to the monitoring
outputs and record the non-processed
input signal on the track.
For example, you can apply an insert
effect to a microphone, to make a vocalist
feel more comfortable singing, but still
record the vocal without the effect.
Effect Project
NOTE
• You can play back a project when it is protected,
but you cannot change it. If you want to record in
it or edit it again, set “PROTECT” to “Off.”
• Projects that are not protected will be automatically
saved to the SD card when you turn the POWER
switch OFF or when you open another project.
• We strongly recommend setting “PROTECT” to
“On” once you complete a piece of music to avoid
saving a mistaken operation later.
1
Press [PROJECT].
Protecting a project
PROJECT>EDIT>PROTECT
All elements of a piece of music are stored
in a project as one unit, including audio files,
information about track assignments, and
mixer, effect, metronome and tuner settings.
The unit can handle a maximum of 1000
projects on a single card. Create a new project
for each new piece of music.
Data saved in a project:
* Audio data for every track including the
MASTER track
* Folder settings selected by tracks
* Mixer settings
* Patch numbers and patch contents set for
insert and send return effects
* Contents of play lists
* All other necessary files
Press [ ].
3
HINT
• The lock icon appears on
the screen when a project
is protected.
1
Press [INSERT EFFECT].
.
PROJECT
>EDIT
Change
menu
Select
2
Press [ENTER].
>EDIT
To Next Page
Loading...
