Playback of a project
Recorded audio files are assigned to tracks for storage. During playback, all the tracks that you have
enabled for playback with their status keys (green lights on) will be played.
Repeat playback of a specific section (A-B repeat)
You can set and repeat playback between a beginning point (A) and an ending point (B) in a project.
HINT
• When playback reaches point B, it automatically
goes back to point A and continues playback.
• While the A↔B icon is on, playback repeats
continuously.
• You can make these settings both during playback
and when stopped.
• If you set point B at a time before point A, repeat
playback will start from point B.
• If you want to make new settings, cancel the
previous ones by pressing the [A-B REPEAT] key
again and then make the new ones.
Ref. : Assigning files to tracks.
P.23
Overview of recording and playback process in a project Setting A-B points
A-B repeat: playback repeatedly
TRACK
1/9
TRACK
2/10
TRACK
3/11
TRACK
4/12
TRACK
5/13
TRACK
6/14
TRACK
7/15
TRACK
8/16
MASTER
TRACK
A↔ blinks.
Press [A-B REPEAT] .
2
Press [PLAY] to start repeat
playback.
5
Press [STOP] to stop playback.
6
A-B Repeat section
Recording the first track
Track 1: monaural recording Track 7 & 8: stereo recording
MONO-000.WAV
REC NOT ASSIGN
NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN
NOT ASSIGN NOT ASSIGN
NOT ASSIGN NOT ASSIGN
STE-000.WAV
REC
Recording more tracks/Playback of the previously recorded tracks
Track 1: monaural playback
Monaural recording on tracks 11, 12 and 13
1-8 TRACK
9-16 TRACK
MONO-000.WAV
MONO-001.WAV MONO-002.WAV MONO-003.WAV
REC REC REC
PLAY
NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN
NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN
STE-000.WAV
PLAY
Playback
Track 1, 11, 12 and 13: monaural playback Track 7 & 8: stereo playback
MONO-000.WAV
MONO-001.WAV MONO-002.WAV MONO-003.WAV
PLAY PLAY PLAY
PLAY
NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN
NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN NOT ASSIGN
STE-000.WAV
PLAY
Assigning tracks and playback
Track 1, 2, 3 & 4: monaural playback Track 7 & 8: stereo playback
VOCAL2.WAV VOCAL.WAV BASS.WAV GUITAR.WAV
NOT ASSIGN NOT ASSIGN NOT ASSIGN
NOT ASSIGN
PLAY PLAY PLAY PLAY
NOT ASSIGN NOT ASSIGN NOT ASSIGN
NOT ASSIGN
NOT ASSIGN NOT ASSIGN
STE-000.WAV
PLAY
Playback Playback
1
Locate the
beginning point.
3
Locate the end point.
Press [A-B REPEAT] .
4
A↔B icon
Cancel A-B repeat and the points
Press [A-B REPEAT] again
to cancel.
7
A↔B icon off
Plays again and again
To Next Page
Loading...
