Effect patch overview
You can select patches in the R16, use effects easily, make fine adjustments to suit the music, and then
edit and save patches.
Effect patch use process
Algorithms and patches
Insert effects and
send return effects
The insert effects in one project include 330
patches classified into 9 algorithms. You can
select the algorithms and patches according
to your application and choose where to insert
those patches.
The send/return effect is internally connected
in the SEND/RETURN at the MIXER section.
There are 2 types of effects adjustable by their
mixer SEND LEVELS (signal volumes sent to
the effect) and they can be used together.
One effect is called an “effect module”
and it consists of 2 elements.
Effect types, which are different types,
and effect parameters, which control the
depth of the effect.
A patch is the result of adjusting the effect
type and parameters of each module.
An algorithm is the orderly arrangement of
the initial patches arranged for recording
targets or methods.
Use effects
→INSERT EFFECT P.47
→SEND RETURN P.47
→REV/DLY SEND P.37
Adjust the
effect send level
Adjust the
effect send level
→REV SEND P.37
Patch
Algorithms
Module
Effect types
Parameters
CLEAN
COMP/
LIMITER
EFX
PRE
AMP
3BAND
EQ
ZNR
MODULATION/
DELAY
PATCH
LEVEL
MODULATION/
DELAY
CHORUS
Depth
Rate
Tone
Mix
Depth
Rate
Tone
Mix
Depth
Rate
Resonance
Manual
ENSEMBLE FLANGER
~
DISTORTION
ACO/BASS SIM
BASS
Patch
selection
→PATCH SELECT P.48
You can select and
use algorithms,
pre-set patches
and their com-
binations.
Save patches
→SAVE P.53
Edit a patch
→EDIT P.51
You can make subtle
adjustments to effect
module parameters to
achieve sounds you
like.
Edit the modules
Select the types
Adjust the parameters
Edit the patch level
Import patches
→IMPORT P.54
You can use patches
imported from other
projects.
All patches
One patch
Set insertion
position
→INPUT SOURCE P.49
INPUT 1-8
MASTERING
Track 1-16
Use only for
monitoring
→REC SIGNAL P.55
Patch initialization
→PATCH INITIAL (PDF)
Guide
: Only “AI” uses “SEND E”
: “R” and “AI” both use
“SEND E”
: Only “AI” uses “INSERT E”
: “R” and “AI” share INSERT
: All shared
R/AI shared:
INSERT E/SEND E shared
R = Recorder
AI = Audio Interface
SEND E. =
SEND RETURN EFFECT
INSERT E. = INSERT EFFECT
Effect
Arrangement
Arrangement
Arrangement
Arrangement
Arrangement
Arrangement
Display
Display
Display
Display
Display
Display
Monaural
Monaural
Stereo
Stereo
Stereo
Stereo
Monaural
×2
Monaural
×2
Monaural
×8
Monaural
×8
*ISOLATOR/MIC MODELING
MOD
*
*
*
To Next Page
Loading...
