47 
The T+ Layout 
 
Touch to type the left letter on the key; double-tap or flick 
right to type the right letter/symbol on the key. Touch and 
hold a key and slide left or right to choose more letters and 
symbols. 
If word prediction is enabled ( ), just touch the keys and 
choose the right word. 
To enable and use Curve: 
1.  In the TouchPal X keyboard screen, touch    >   
and check Curve
® 
- Word gesture. 
2.  If prompted, touch OK to switch to the T26 layout. 
3.  Move your finger from letter to letter on the keyboard to 
trace a word without lifting the finger until you reach the 
end of the word. 
  NOTE:    Curve is only available in the T26 layout.