ZyXEL Communications ATP800 - Page 669

Chapter 34 Object
ZyWALL ATP Series User’s Guide
669
Figure 439 Configuration > Object > ISP Account
The following table describes the labels in this screen. See the ISP Account Add/Edit section below for
more information as well.
34.12.1.1 ISP Account Add/Edit
The ISP Account Add/Edit screen lets you add information about new accounts and edit information
about existing accounts. To open this window, open the ISP Account screen. (See Section 34.12.1 on
page 668.) Then, click on an Add icon or Edit icon to open the ISP Account Edit screen below.
Table 288 Configuration > Object > ISP Account
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
References Select an entry and click References to open a screen that shows which settings use the entry.
# This field is a sequential value, and it is not associated with a specific entry.
Profile Name This field displays the profile name of the ISP account. This name is used to identify the ISP
account.
Protocol This field displays the protocol used by the ISP account.
Authentication
Type
This field displays the authentication type used by the ISP account.
User Name This field displays the user name of the ISP account.