Chapter 7 Networking
LTE7460-M608 User’s Guide
64
Figure 48 Networking > DNS Settings
The following table describes the labels in this screen
7.5 Firewall > IPv4/Port Filter Screen
The LTE7460-M608 firewall is a packet filtering firewall and restricts access based on the source/
destination computer network address of a packet and the type of application. Use this screen to
configure IP filtering rules. IPv6/Port Filter is useful to allow or block any traffic to/from specific IPv6
addresses or TCP/UDP ports. To access this screen, click Networking > Firewall > IPv4/Port Filter.
Figure 49 Networking > Firewall > IPv4/Port Filter
Table 19 Networking > DNS Settings
LABEL DESCRIPTION
DNS Settings
DNS Mode Select Auto if your LTE7460-M608 pass DHCP server to the LAN users. Otherwise,
select Manual if you to assign a specific DNS server information to the LAN users.
have the IP address of a DNS server.
Apply Click Apply to save your changes.
Reset Click Reset to restore the screen’s last saved settings.
To Next Page
Loading...
