Chapter 4 Home
LTE7460-M608 User’s Guide
25
4.3 Setup Wizard
Click Home > Setup Wizard to open the wizard screen.
4.3.1 Operating Mode
The LTE7460-M608 offers two different system operation modes: Router Mode and Bridge Mode. When
you click on Setup Wizard the following screen opens. To learn more about each mode see Section 7.2
on page 59.
Network Provider This field displays the name of the network provider.
IPv4 Internet Status This field displays Connected if the LTE7460-M608 has IPv4 Internet. It displays
Disconnected if there is no Internet connection through IPv4 Internet.
IPv4 IP address This field displays the IPv4 IP address your LTE7460-M608 uses to access the Internet.
IPv4 Connection Time This field displays the time your LTE7460-M608 IPv4 connection to the Internet has
been up.
IPv6 Internet Status This field displays Connected if the LTE7460-M608 has IPv6 Internet. It displays
Disconnected if there is no Internet connection through IPv6 Internet.
IPv6 IP address This field displays the IPv6 IP address your LTE7460-M608 uses to access the Internet.
Note: This information will not be displayed if your ISP does not support IPv6
Internet protocol.
IPv6 Connection Time This field displays the time your LTE7460-M608 IPv6 connection to the Internet has
been up.
Internet
Data Usage This field displays the amount of downstream and upstream in kilobytes (KB) used in
the LTE7460-M608’s LAN.
Note: This information will not be displayed if you have not entered
the SIM’s PIN code. Enter the PIN code here before it is
available for data usage.
Firmware Version This field displays the LTE7460-M608’s current firmware version.
Table 5 Home
LABEL DESCRIPTION
To Next Page
Loading...
