Chapter 6 Home Network
LTE7460-M608 User’s Guide
45
6.5 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network,
obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a
device can leave a network smoothly and automatically when it is no longer in use. See page 48 for
more information on UPnP.
Use the following screen to configure the UPnP settings on your LTE7460-M608. Click Home Network >
UPnP to display the screen shown next.
Figure 26 Home Network > UPnP
The following table describes the labels in this screen.
6.6 The Connected Devices Screen
Click Home Network > Connected Devices to view current information (including IP Address, Host Name
and MAC Address) of network clients connected to the LTE7460-M608. The following screen displays.
Figure 27 Home Network > Connected Devices
Table 15 Network Settings > Home Networking > UPnP
LABEL DESCRIPTION
Enable UPnP Select On to activate UPnP. Be aware that anyone could use a UPnP application to open the
web configurator's login screen without entering the LTE7460-M608's IP address (although you
must still enter the password to access the web configurator).
Apply Click Apply to save your changes.
Reset Click Reset to restore your previously saved settings.
To Next Page
Loading...
