LTE7460-M608 User’s Guide
11
CHAPTER 2
Introducing the Web
Configurator
2.1 Overview
The web configurator is an HTML-based management interface that allows easy device setup and
management via Internet browser. Use Internet Explorer 11.0 and later versions, Chrome 52 and later
versions, Mozilla Firefox 47 and later versions, or Safari 8.0 and later versions. The recommended screen
resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
2.1.1 Login Accounts
There is one system account that you can use to log in to the LTE7460-M608: “admin”. The admin
account allows you full access to all system configurations. The default admin user is “admin” and the
default password is “1234”.
2.1.2 Accessing the Web Configurator
1 Make sure your LTE7460-M608 hardware is properly connected (refer to the Quick Start Guide).
2 Launch your web browser.
3 Type "https://192.168.1.1" as the URL.
4 A password screen displays. Type “admin” as the default Username and “1234” as the default password
to access the device’s Web Configurator. Click Login. If you have changed the password, enter your
password and click Login.
To Next Page
Loading...
